Search results for " graphene oxide"

Investigation of Acetone Vapour Sensing Properties of a Ternary Composite of Doped Polyaniline, Reduced Graphene Oxide and Chitosan Using Surface Pla…

2020

This work reports the use of a ternary composite that integrates p-Toluene sulfonic acid doped polyaniline (PANI), chitosan, and reduced graphene oxide (RGO) as the active sensing layer of a surface plasmon resonance (SPR) sensor. The SPR sensor is intended for application in the non-invasive monitoring and screening of diabetes through the detection of low concentrations of acetone vapour of less than or equal to 5 ppm, which falls within the range of breath acetone concentration in diabetic patients. The ternary composite film was spin-coated on a 50-nm-thick gold layer at 6000 rpm for 30 s. The structure, morphology and chemical composition of the ternary composite samples were character…

Sensors for the monitoring of analytes in the sweat

In the last decade, can be found an exceptional growth in research activity relating to the development of wearable devices, capable of continuously monitoring the health conditions of the wearer by analyzing body fluids such as blood, urine, saliva, tears and sweat. Among the body fluids available, sweat is a biofluid of particular interest, as it allows a non-invasive, continuous and comfortable collection. Human sweat contains useful information on the health of an individual and therefore is an excellent biofluid for the detection of specific analytes. The most abundant ions in the sweat are Na+ and Cl- (10 - 100 mM), and their monitoring is useful in patients with cystic fibrosis. Othe…

PANI-Based Wearable Electrochemical Sensor for pH Sweat Monitoring

2021

Nowadays, we are assisting in the exceptional growth in research relating to the development of wearable devices for sweat analysis. Sweat is a biofluid that contains useful health information and allows a non-invasive, continuous and comfortable collection. For this reason, it is an excellent biofluid for the detection of different analytes. In this work, electrochemical sensors based on polyaniline thin films deposited on the flexible substrate polyethylene terephthalate coated with indium tin oxide were studied. Polyaniline thin films were abstained by the potentiostatic deposition technique, applying a potential of +2 V vs. SCE for 90 s. To improve the sensor performance, the electronic…

Photocatalytic H2 evolution from aqueous solutions of oxygenated organic compounds in the presence of C3N4/reduced graphene oxide based photocatalysts

2022

Composites of C3N4/reduced graphene oxide have been used as a cheap and promising photocatalysts for triethanolamine and ethanol photo-reforming with H2 generation in aqueous solution. The rate of H2 production over the best performing photocatalysts reached 1,415 μmol·h-1·g-1 which increases up to 57,306 in the presence of 1% of Pt. The apparent quantum efficiency of the optimal material was 7 % by using both LED and natural sunlight irradiation

Ascorbic Acid determination using linear sweep voltammetry on flexible electrode modified with gold nanoparticles and reduced graphene oxide

2020

Indium tin oxide (ITO) coated on flexible polyethylene terephthalate (PET) substrate electrode was modified with reduced graphene oxide and gold nanoparticles by simple co-electrodeposition performed at -0.8 V vs SCE for 200 s. All samples were characterized by electron scan microscopy. The as prepared electrode was used as electrochemical sensor to selective detection of ascorbic acid using linear sweep voltammetry. Excellent results were obtained in a linear range from 20 to 150 µM of ascorbic acid with a limit of detection of about 3.1 µM (S/N=3.3). The sensors have a reproducibility of about 5.5% and also show high selectivity towards different interferents such as chlorine, calcium, ma…

Photothermal nanofibrillar membrane based on hyaluronic acid and graphene oxide to treat Staphylococcus aureus and Pseudomonas aeruginosa infected wo…

2022

Here we reported the fabrication of an electrospun membrane based on a hyaluronic acid derivative (HA-EDA) to be used as a bandage for the potential treatment of chronic wounds. The membrane, loaded with graphene oxide (GO) and ciprofloxacin, showed photothermal properties and light-triggered drug release when irradiated with a near-infrared (NIR) laser beam. Free amino groups of HA-EDA derivative allowed autocrosslinking of the elec- trospun membrane; thus, a substantial enhancement in the hydrolytic resistance of the patch was obtained. In vitro antibacterial activity studies performed on Staphylococcus aureus and Pseudomonas aeruginosa revealed that such electrospun membranes, due to the…

FLEXIBLE ELECTRODE BASED ON GOLD NANOPARTICLES AND REDUCED GRAPHENE OXIDE FOR URIC ACID DETECTION USING LINEAR SWEEP VOLTAMMETRY

2021

In this work, an electrochemical sensor for uric acid determination is shown with a preliminary study for its validation in real samples (milk and urine). Uric acid can be electrochemically oxidized in aqueous solutions and thus it is possible to obtain electrochemical sensors for this chemical by means of this electrooxidation reaction. Indium tin oxide coated on flexible polyethylene terephthalate substrate, modified with reduced graphene oxide and gold nanoparticles by co-electrodeposition, was used. Electrodeposition was performed at -0.8V vs SCE for 200 s. All samples were characterized by electron scan microscopy and electron diffraction spectroscopy. A careful investigation on the ef…

Electrochemical sensor for phosphate ions based on laser scriber reduced graphene oxide

2022

This preliminary work shows a new and innovative way to produce laser scribed reduced graphene oxide (LSGO) electrodes using different porous substrates (ranging from paper to plastic and fabric). The obtained electrodes were also tested as electrochemical sensors towards the detection of phosphate ions in water. To obtain the electrodes, a water suspension of GO was filtered on top of substrate (such as Whatman® filter paper) and a complete sensor was obtained from its reduction using a CO2 laser. The electrode is composed of working and counter electrodes made of LSGO and a reference electrode of a Ag/AgCl obtained by using a commercial AgCl conductive paste. Phosphate ions were detected …

FABBRICAZIONE DI SENSORI ELETTROCHIMICI NANOSTRUTTURATI PER APPLICAZIONI NELL’INDUSTRIA ALIMENTARE E BIOMEDICHE

2023

Nanostructured Lead Electrodes with Reduced Graphene Oxide for High-Performance Lead–Acid Batteries

2022

Nanostructured Pb electrodes consisting of nanowire arrays were obtained by electrodeposition, to be used as negative electrodes for lead–acid batteries. Reduced graphene oxide was added to improve their performances. This was achieved via the electrochemical reduction of graphene oxide directly on the surface of nanowire arrays. The electrodes with and without reduced graphene oxide were tested in a 5 M sulfuric acid solution using a commercial pasted positive plate and an absorbed glass mat separator in a zero-gap configuration. The electrodes were tested in deep cycling conditions with a very low cut-off potential. Charge–discharge tests were performed at 5C. The electrode wi…